Notice of the URL Change

For more safety, better and quick view, we have moved the site to new address.
In 5 seconds, this page will be redirected to our new online shopping site.
Please kindly bookmark and visit us at the new site at
Thank you,

Padico Co., Ltd.

Home |  Log In
Padico Online Shop

Watar Drop 3D Silicone Mold


Waterdrop mold can be made two different drops.
One has a hole which makes easy to set anaccessory part like eye bolt on top.
The other one has simple shape of drop witout a hole.   
A just fit resin eye bolt can be made wth this mold.  
Approximately 1 gram of resin needs for one water drop.

Product #403268
Mold Size:54×37×18mm
Net weight:20g
Package size:90×150×19mm
Gross weight:23.5g
Silicone mold for 10x15mm size water drop with a hole/ 10×15.5mm sized water drop without a hole, and 4Φ×7mm sized eyebolt 1 pc in a package
Use:Resin Craft
Upper limited temperature:200℃
Lower limited temperature:-50℃

Tips for making beautiful drop

Pour resin not up to the edge of the mold to avoid burrs.
First 1-2 drops of resin for covering the narrow top. Use a stick to take bubbles out.

How to reduce burr on the drop

Use sandpaper #600 to deburr. Fill resin in a recess.
Rub with sandpaer again and cover it with gloss coat.

(How to use)

1 Pour resin little by little up to just below the spout. Do not speard it to the out. Get rid of bubbles by sticking a toothpick. Cure it under the UV-LED lamp.
※Turn the mold over and cure it again with LED light.

2 Push the resin out from its back after cooling down.
※The resin has high temperature just after exposed. Please be careful.

3 Fill a hollow part with a small amount of resin and cure to make its shape round

4 Set an eyebolt
Paste resin on eyebolt and insert it. Cure it again. It can be fasten with glue


Sold Out
  • Model: 403268
  • Shipping Weight: 0.03kg

This product was added to our catalog on Monday 22 July, 2019.

 | Home |